Quick Camper

Tools: For a list of all tools required click here.

Timbren Axles: Model dependent on hole pattern chosen when ordering. If you plan on installing off-road tires, you'll want to purchase the "long spindles" version. For 1 Tonne Models click here. For 3500HD Models click here.

Hubs & Brakes(If desired): At a minimum, you will need idler hubs. For common axle patterns such as Toyota 4Runner & Toyota Tacoma(6x5.5"), and most Jeeps(5x5"); it is possible to match your lug pattern, which means there is only need for one spare! You will want to check this prior to choosing your hole pattern with your kit, however if you made a mistake feel free to contact us prior to shipment and we will get you squared away. You can order these on the same product page as your axles from Timbren.

Wheels & Tires

Cabinetry: The galley area accommodates 22" of cabinetry.

Interior Electrical(If desired): If you want power, you will need a 12 or 24 Volt system. We do offer 5 different power packages, which you can find the details here. In addition, you will need to install wiring to any electrical accessories. For best results, we recommend using wiring covers that can be glued or fastened to the interior panels. The more economical option would be to use wire loom and fasten it to the walls using cable clamps to secure into place.

Sealant(Available Option): Each cab joint needs to be sealed. The trailers are engineered to be "triple sealed"; which means there is a layer of butyl tape between the exterior sheets, a bead of Dynaflex Sealant on the exterior edges, and a Silicone Sealant bead on the interior joints. All of which, should be available at your local hardware store, as well. This process prevents any moisture from penetrating the walls and ensures years of waterproofing.